Cisco Headend System Release 2.7 User Guide
Add Source IDs for SDV Services in an RNCS Environment
4024447 Rev C
87
3 Click File and select New. The Set Up Source window opens.
4 Enter a name in the Source Name field and an ID value in the Source ID field.
Important: Spaces are not permitted in the Source Name field.
5 From the SDV Status field, click Active to define the source to use SDV services.
Note: Selecting Inactive will set up the source for SDV services, but it will
remain inactive until it is changed to Active. Selecting None will not set up the
source for SDV services.
remain inactive until it is changed to Active. Selecting None will not set up the
source for SDV services.
6 Click SDV Parameters to set up parameters for the SDV source. The DNCS SDV
Source window opens.
7 Maintain the default values or change them to different values that are specific to
your system.
8 Did you make changes to the DNCS SDV Source window?
If yes, click Save and then click Exit.
If no, click Exit.
9 From the Set Up Source window, click Save. The new source is listed in the
Source List window
10 Do you need to create another new source ID?
If yes, repeat steps 1–9.
If no, go to Creating a Source Definition (on page 88).