Cisco Headend System Release 2.7 Maintenance Manual
DHCT and CableCARD Module Administrative Status
4024836 Rev D
39
Verify the Administrative Status of a DHCT or CableCARD Module
Follow this procedure to verify the administrative status of a device.
1 From the Administrative Console, select the DNCS tab.
2 Select the Home Element Provisioning tab.
3 Click DHCT. The DHCT Provisioning window opens.
4 Enter one of the following for the device you want to check:
2 Select the Home Element Provisioning tab.
3 Click DHCT. The DHCT Provisioning window opens.
4 Enter one of the following for the device you want to check:
MAC address
IP Address
Serial Number
5 Click Continue. The Set Up DHCT window opens.
6 On the Communications tab, the Administrative State of the device is listed
6 On the Communications tab, the Administrative State of the device is listed
about halfway down the screen. It will display one of the following values:
Out of Service
In Service One Way
In Service Two Way
Deployed