Cisco Headend System Release 2.7 Installation Guide

 

4038415 Rev A 

49 

 

Complete these steps to install the SR 2.8.2/3.8.2/4.3.2 DNCS software. 

Notes: 

 

You should still be logged in as root user to the xterm window on the DNCS. 

 

It may take as long as 1 hour to install the DNCS software. 

1  Insert the CD labeled similar to DNCS Application  into the CD drive of the 

DNCS. The system automatically mounts the CD to /cdrom within 30 seconds. 

2  Type the following command and press Enter. A list of the mounted filesystems 

appears. 

Note:  The presence of /cdrom in the output confirms that the system correctly 
mounted the CD. 

3  Type the following command and press Enter. The /cdrom/cdrom0 directory 

becomes the working directory. 

4  Type the following command and press Enter. The system displays DNCS 

package information and the Are you SURE you want to continue? message 
appears. 

5  Type y and then press Enter. The system displays the package and software 

versions that will be installed and displays a message prompting you to press 
Enter to continue. 

6  Press Enter. The system displays a message that asks whether you have backed 

up the DNCS and host database. 

7  Type y and then press Enter. The system displays a message that asks you to 

define the number of days until EMMs are deleted from the system. 
Note:  To see the current value used by the system, type the following in an 
xterm window and then press Enter.