Cisco Headend System Release 2.7 Guia Da Instalação
Install the DNCS Software
4038415 Rev A
49
Install the DNCS Software
Complete these steps to install the SR 2.8.2/3.8.2/4.3.2 DNCS software.
Notes:
You should still be logged in as root user to the xterm window on the DNCS.
It may take as long as 1 hour to install the DNCS software.
1 Insert the CD labeled similar to DNCS Application into the CD drive of the
DNCS. The system automatically mounts the CD to /cdrom within 30 seconds.
2 Type the following command and press Enter. A list of the mounted filesystems
appears.
df -n
Note: The presence of /cdrom in the output confirms that the system correctly
mounted the CD.
mounted the CD.
3 Type the following command and press Enter. The /cdrom/cdrom0 directory
becomes the working directory.
cd /cdrom/cdrom0
4 Type the following command and press Enter. The system displays DNCS
package information and the Are you SURE you want to continue? message
appears.
appears.
install_pkg
5 Type y and then press Enter. The system displays the package and software
versions that will be installed and displays a message prompting you to press
Enter to continue.
Enter to continue.
6 Press Enter. The system displays a message that asks whether you have backed
up the DNCS and host database.
7 Type y and then press Enter. The system displays a message that asks you to
define the number of days until EMMs are deleted from the system.
Note: To see the current value used by the system, type the following in an
xterm window and then press Enter.
Note: To see the current value used by the system, type the following in an
xterm window and then press Enter.
less /dvs/dncs/bin/CED.in