Cisco Headend System Release 2.7 Installation Guide
Chapter 2 SR 2.8.2/3.8.2/4.3.2 Upgrade Procedures
70
4038415 Rev A
Restart the Application Server at Rovi Sites
Follow this procedure only if the site you are upgrading supports the Rovi
Corporation Application Server. If the site you are upgrading supports the SARA
Server, skip this section and go to the next procedure in this chapter.
Corporation Application Server. If the site you are upgrading supports the SARA
Server, skip this section and go to the next procedure in this chapter.
Restarting the Application Server at a Rovi Site
Complete the following steps to check if the Rovi application has started on the
Application Server, and then to start it, if necessary.
1 If necessary, open an xterm window on the Application Server.
2 Type CheckServices and then press Enter. A list of drivers appears.
Application Server, and then to start it, if necessary.
1 If necessary, open an xterm window on the Application Server.
2 Type CheckServices and then press Enter. A list of drivers appears.
Note: Each driver is associated with an Application Server process.
3 Does the word Yes appear next to each driver?
If yes, skip the rest of this procedure and go to the next procedure in this
chapter.
chapter.
If no, go to step 4.
Note: The word Yes next to a driver indicates that the process has started.
4 Press the middle mouse button, and then select Passport Start.
5 When the word Yes appears next to each driver, go to step 6.
6 Follow the on-screen instructions to close the window containing the list of Rovi
5 When the word Yes appears next to each driver, go to step 6.
6 Follow the on-screen instructions to close the window containing the list of Rovi
drivers.
Note: The AppServer Control window on the DNCS Administrative Console
Status window may display an inactive status. This is normal for a Rovi site.
Note: The AppServer Control window on the DNCS Administrative Console
Status window may display an inactive status. This is normal for a Rovi site.