Cisco Headend System Release 2.7 Release Notes

Page of 32
 
Chapter 2    What Are the Site Requirements? 
 
 
 
16 
4002179 Rev B 
What to Verify Using the Doctor Report 
Using the results of the Doctor Report, verify that your system meets the following 
requirements. For detailed information on reading the data in the Doctor Report, see 
the DBDS Utilities Version 6.1 Installation Instructions and DNCS Utilities User Guide 
(part number 4020695). 
Important: DBDS Utilities 6.1 is required for SR 4.2.1. 
 
DNCS System Release Required 
Your system must be running SR 2.2, SR 3.2, or later. In the Doctor Report, look for 
the SAIdncs entry under the All SAI Installed Package Information section. Ensure 
the version is 3.0.1.16 or later. If you have installed Service Packs for SR 2.2, your 
version may include additional letters and numbers. For example, 3.0.1.16p7 is SR 
2.2 Service Pack 2. 
 
DNCS Hardware Configurations 
Ensure your site meets the following DNCS hardware requirements before 
upgrading to SR 4.2.1. The following table lists the minimum requirements for the 
DNCS hardware platforms that are supported by SR 4.2.1. 
DNCS Server 
Platform 
Hard Drive 
Configuration 
Memory 
Processor 
Sun Fire V890 
 
6 X 146 GB 
 
12 X 146 GB 
 
8 GB min. 
 
16 GB min. 
 
2 X 1.5 GHz min. 
 
4 X 1.5 GHz min. 
Sun Fire V880 
 
12 X 73 GB 
 
6 X 73 GB 
 
8 GB min. 
 
4 GB min. 
 
4 X 900 MHz min. 
 
2 X 900 MHz min. 
Sun Enterprise 450 
 
7 X 18 GB 
 
10 X 18 GB 
4 GB max. 
4 X 400 MHz min. 
Sun Enterprise 445  4 x 73 GB 
4 GB  
2 x 1.6 GHz min 
 
 
Application Server Hardware Configurations 
The following table lists the Application Server hardware platforms that are 
supported by SR 4.2.1. 
Application Server 
Platform 
Hard Drive 
Configuration 
Memory 
Processor 
Sun V240 
2 X 73 GB min. 
2 GB min. 
1 X 1.34 GHz min. 
Sun V245 
2 X 73 GB min. 
2 GB min. 
1 x 1.34 GHz min. 
Sun Blade 150 
1 X 20 GB min. 
512 MB min. 
1 X 550 MHz min. 
Sun Ultra 5 
1 X 20 GB min. 
256 MB min. 
1 X 333 MHz min.