Cisco Headend System Release 2.5 Release Notes

Page of 64
 
4001703 Rev B 
Preface 
vii 
About This Guide,
 Continued 
Related Publications 
You may find the following documents useful as you read these release notes. The 
publish dates for these documents are valid as of this printing. Some of these 
documents may have since been revised and have newer publish dates. 
• 
Configuring Simulcast Services at a Sub-Hub Level Technical Bulletin (part number 
4011503, expected publish date: spring 2006) 
• 
DBDS Utilities 5.1 Configuration Guide (part number 4000828, expected publish 
date: spring 2006) 
• 
DBDS Utilities 5.1 Installation Instructions and DNCS Utilities User’s Guide (part 
number 740020, expected publish date: spring 2006) 
• 
DBDS Utilities Version 5.1 Release Notes (part number 749636, expected publish 
date: spring 2006) 
• 
Setting Up Dual Sources and Hiding Services from CableCARD Hosts Configuration 
Guide (part number 4011367, expected publish date: spring 2006) 
• 
Configuring the DBDS System for Using the Common Download Process With 
OpenCable™ Hosts Application Guide (part number 4011041, published January 2006) 
• 
OCAP Architecture Guide (part number 738184, published January 2006) 
• 
OCAP Installation and Upgrade Instructions (part number 732578, published January 2006) 
• 
QAM Modulator Software Version 2.4 Release Notes and Installation Instructions (part 
number 4003389, published January 2006) 
• 
Recovered IPPV Purchases After SR 2.5 Upgrade Operations Alert Bulletin (part 
number 4013346, published January 2006) 
• 
Setting Up the PowerKey CableCARD Module on the DNCS for SR 2.5/3.5 and SR 4.0 
(part number 4011765, published January 2006) 
• 
TSBroadcaster User’s Guide Cisco’s OCAP™ Object Carousel Solution (part number 
4011043, published January 2006) 
• 
GQAM Software Version 1.2 Release Notes and Installation Instructions (part number 
4012452, published December 2005) 
• 
DBDS Backup and Restore Procedures for SR 2.2/3.2, SR 2.5/3.5, SR 2.6/3.6, SR 3.3, 
CV SR 3.4, and SR 4.0 (part number 4011040, published September 2005) 
• 
Enabling Content Protection for Broadcast Programming (part number 4005893, 
published September 2005) 
• 
MQAM Modulator Software Version 2.5.0 Release Notes and Installation Instructions 
(part number 4011045, published September 2005) 
• 
Program and System Protocol Information Configuration for System Releases 2.5, 3.5, and 
4.0 (part number 4011319, published September 2005)