Cisco Model D-PCG1000 PowerKEY CAS Gateway Release Notes

Page of 40
 
 
About This Guide 
4009746 Rev B 
 
About This Guide 
Introduction 
This document provides the information and procedures for installing Netcrypt™ 
software version 1.0 on a Netcrypt Bulk Encryptor. This document also provides a 
description of the functionality this software provides for a Netcrypt Bulk Encryptor. 
Purpose 
This document enables system operators to install Netcrypt software version 1.0 on a 
Netcrypt Bulk Encryptor. 
Scope 
This document provides instructions to install Netcrypt software version 1.0 on a 
Netcrypt Bulk Encryptor. It does not provide instructions for installing a Netcrypt 
Bulk Encryptor in your headend. 
Note: For instructions to install a Netcrypt Bulk Encryptor in your headend, refer to 
Netcrypt™ Bulk Encryptor Hardware Installation and Operation Guide. For the part 
number for this document, see Related Publications (on page v). 
Audience 
System operators or Cisco engineers who are responsible for installing Netcrypt 
software onto a Netcrypt Bulk Encryptor should read this publication. 
 
Related Publications 
You may find the following publications useful as resources when you implement 
the procedures in this document. Check the copyright date on your resources to 
assure that you have the most current version. The publish dates for the following 
documents are valid as of this printing. However, some of these documents may 
have since been revised: 
 
DBDS Utilities Version 6.1 Installation Instructions and DNCS Utilities User’s Guide 
(part number 740020, expected publish date: late 2006) 
 
Netcrypt™ Bulk Encryptor Hardware Installation and Operation Guide (part number 
4001444, [revision expected date: late 2006]) 
Document Version 
This is the second release of this document.