Cisco Model D-PCG1000 PowerKEY CAS Gateway Release Notes
2-4
SARA Server 3.1.6 Installation Instructions
4019300 Rev B
Verify Key Parameters in the onconfig File
Introduction
After you run the Doctor Report, verify that the TAPEDEV and LTAPEDEV
parameters are set correctly in the onconfig file. If these parameters are set
incorrectly, you may encounter difficulties during the installation.
How Long Does It Take?
On a typical system, it takes about 1 minute to determine the current settings of the
TAPEDEV and LTAPEDEV parameters and about 5 minutes to change the settings.
Verify TAPEDEV and LTAPEDEV Parameters
Complete these steps to verify that the TAPEDEV and LTAPEDEV parameters are
set correctly.
1.
On the DNCS, open an xterm window.
2.
Type cd /export/home/informix/etc and press Enter.
Result: The system makes /export/home/Informix/etc the working
Result: The system makes /export/home/Informix/etc the working
directory.
3.
Type grep –i tapedev onconfig and press Enter.
Result: The system searches the onconfig file and displays lines that contain
Result: The system searches the onconfig file and displays lines that contain
“tapedev,” similar to the example shown here.
4.
Did the system display /dev/null as the tape device path and log tape device
path?
•
•
If yes, the TAPEDEV and LTAPEDEV parameters are set correctly. Go to
step 9.
•
If no, go to step 5.