Cisco Model D-PCG1000 PowerKEY CAS Gateway Release Notes
4019300 Rev B
SARA Server 3.1.6 Installation Instructions
2-27
Verify SARA Server Versions
Introduction
After you install the required software for SARA Server 3.1.6, next ensure that the
correct software version was installed on the SARA Server as described in this
section.
To verify that the correct version was installed during the upgrade, use pkginfo, a
To verify that the correct version was installed during the upgrade, use pkginfo, a
Solaris software management tool. The pkginfo tool displays details about a software
package, including the version number and status of the package.
Important: If pkginfo indicates the status of the software is not completely installed,
Important: If pkginfo indicates the status of the software is not completely installed,
contact Cisco Services for assistance.
Verifying SARA Server Versions
After you verify the DNCS software versions, complete these steps to verify the
software versions installed on the SARA Server during the upgrade.
1. On the SARA Server xterm window, type pkginfo -l SAIapsrv and press
Enter:
Note: The –l is a lowercase L.
Result: The system displays details about the SARA Server software
Note: The –l is a lowercase L.
Result: The system displays details about the SARA Server software
package (SAIapsrv), similar to the following example. The software version
number and status are circled in this example.