Cisco Model D-PCG1000 PowerKEY CAS Gateway Release Notes
4019300 Rev B
SARA Server 3.1.6 Installation Instructions
2-29
Reboot the DNCS and the SARA Server
Introduction
After you verify installed software component versions, you must reboot the DNCS
and SARA Server.
Rebooting the DNCS and SARA Server
Complete these steps to reboot the DNCS and SARA Server.
1.
At the root prompt on the SARA Server, type /usr/sbin/shutdown
-y -g0 -i0 and press Enter.
Result: The SARA Server shuts down and an ok prompt appears.
Result: The SARA Server shuts down and an ok prompt appears.
2.
At the root prompt on the DNCS, type /usr/sbin/shutdown -y -g0 -i6 and
press Enter.
Result: The DNCS reboots, and the CDE Login window appears.
Result: The DNCS reboots, and the CDE Login window appears.
3.
Log on to the DNCS as dncs user.
4.
At the ok prompt on the SARA Server, type boot and press Enter.
Result: The SARA Server reboots and the CDE Login window appears.
Result: The SARA Server reboots and the CDE Login window appears.
5.
Log on to the SARA Server as dncs user.
6.
Go to Restart System Components, next in this chapter.