Cisco Model D-PCG1000 PowerKEY CAS Gateway Technical References
4
4019946 Rev B
Changing the Program Number in a BFS BIG Configuration
Changing the Program Number in a BFS BIG Configuration
1 On the DNCS Administrative Console, go to the DNCS tab and then to the
Element Provisioning tab.
Note: The Element Provisioning tab is labelled Network Element Provisioning
tab in SR 2.7/3.7/4.2.
2 Click BIG and the BIG List window opens.
3 Highlight the BIG row and then click File and Open. The Set Up BIG window
opens.
4 Click PAT Configuration.
5 Highlight session 199 and then select File and Open.
6 Type 260 in the Program Number field and click Save to change the program
5 Highlight session 199 and then select File and Open.
6 Type 260 in the Program Number field and click Save to change the program
number.