Cisco Headend System Release 2.5 Troubleshooting Guide
Verify the Frontline System
4024428 Rev B
13
Verify the Frontline System
This section provides procedures for verifying the proper configuration and
performance of the EAC if you are using a Frontline EAS.
Important: For detailed installation procedures, refer to the documentation that
Important: For detailed installation procedures, refer to the documentation that
came with your EAC system.
Note: You can find troubleshooting information on this EAC system in the following
Note: You can find troubleshooting information on this EAC system in the following
topics in this document:
Troubleshooting the Frontline System (on page 65)
Troubleshooting Frontline System Performance (on page 68)
Verifying Frontline EAC Configuration
Use the values in the following table to set the parameters of your Frontline EAC.
Parameter
Value
Comm
Correct value for your
installation
IP Address
IP address of the ISDS
TCP/IP Port
21
FTP Port
4098
FTP Username
easftp
FTP Password
easftp
Local
Correct value for your
installation
Important: There may be additional parameters you need to set on your EAC to
complete the configuration process. Refer to the EAC documentation for specific
troubleshooting and configuration information.