Cisco Cisco Workload Automation 6.3 Installation Guide

Installing the CWA Master for Windows

Configuring the Master

Regulatory: Do not click Cancel once the installation process begins copying files in the Setup Status screen. 
Cancelling the installation at this point corrupts the installation program. 

You will not be able to install the component without the help of Support. If you decide you do not want to install the 
component, you must complete the installation and then uninstall.

On the Setup Completed panel, click Finish.

Verifying Master Connection

Use the Service Control Manager to verify that the Master is running.

From the Windows Start menu on the Master machine, select All Programs > Cisco Workload Automation > 
Scheduler > Service Control Manager to display the CWA Service Manager.

From the Service list, select Scheduler Master. The Master status displays at the bottom of the dialog box.

Click Start to start the Master if it is not running.

Configuring the Master

This section covers these topics:









See 

 for more information about configuring your CWA system and the master.props 

file.

Configuring the Master for SNMP

If you want to use Simple Network Management Protocol (SNMP) to send traps in CWA, you must tell the Master how to 
connect to the SNMP server. You can configure the Master to use SNMP from the master.props file.

Stop the Master using the CWA Service Manager.

From the Start menu on the Master machine, choose Programs > Cisco Workload Automation > CWA Service 
Manager to display the CWA Service Manager.

From the Service list, select Scheduler Master. The Master status displays at the bottom of the dialog box.

Click Stop to stop the Master. (The bottom of the dialog box displays “Scheduler Master: Stopped”.)

Open the master.props file in a text editor such as Notepad.

The master.props file is located in the config directory. If you used the default locations during installation, the 
master.props

file is located at: