Cisco Cisco Workload Automation 6.3 User Guide

www.cisco.com

Configuring the 

JMS Adapter 

Overview

The JMS adapter software is installed as part of a normal installation of CWA. However, you must perform the following 
steps to license and configure the adapter before you can run JMS jobs:



 – License the connection(s) to the JMS instance. You cannot define a JMS connection 

until you have applied the JMS license from Cisco.



 – Define a JMS Authentication user to authorize a connection to be established 

to the JMS's Web server and permit requests to be made on behalf of the authenticated account.



 – Define a JMS connection so the master can communicate with the JMS. 



 – Verify the JMS connection is healthy. 

See 

 for information about general and adapter-specific properties that can be set to 

control things like logging and connection properties. 

Licensing an Adapter

Each CWA Adapter must be separately licensed. You cannot use an Adapter until you apply the license file. If you 
purchase the Adapter after the original installation of CWA, you will receive a new license file authorizing the use of the 
Adapter. 

You might have a Demo license which is good for 30 days, or you might have a Permanent license. The procedures to 
install these license files are described below.

Stop the master:

Windows:

Click 

on Start

 and select All 

.

Verify that the master is displayed in the 

 list and click on the 

 button to stop the master.

UNIX:

Enter 

Create the license file:

For a Permanent license, rename your Permanent license file to master.lic.