Cisco DNCS System Release 2.8.1 3.8.1 4.3.1 User Guide

Use the following fields when you manage TSRs.

Route ID

A unique number that identifies this TSR.

Valid values: Any 2-byte integer in the range of 1 to 65535.

Starting ECM Pid

Provides the starting PID value for the ECM PIDs for the TSR. This field,
along with the Number of ECM Pids field, defines the range of PIDs for
the TSR. 

PIDs from this range are used for inserting PowerKEY ECMs when
encrypted sessions exist 'on top of' the TSR.

Number of ECM Pids Provides the number of PIDs available for ECM PID allocation for the

TSR. This field, along with the Starting ECM Pid field, defines the range
of PIDs for the TSR.

Input

Qam Input Port

Select the input port of the source to the GQAM.



0 - 3: ASI ports 0 to 3, respectively



4: GigE port

Note: If the GQAM is a dual-GigE port GQAM, selecting port
4 selects the logical GigE port, which could physically be
either port 4 or port 5.

Stream Delivery
Type

 

Select one of the following options:



Unicast



Multicast IP Only



Multicast IP + UDP Port



Virtual IP + UDP Port

Source IP Address

The IP address of the source device.

Source IP Address 2 The IP address of the second source device.

Active only if you select Ethernet 1 or 2 in Qam Input Port and one of
the following options in Stream Delivery Type:



Multicast IP Only



Multicast IP + UDP Port



Virtual IP + UDP Port

Source IP Address 3 The IP address of the third source device.

Active only if you select Ethernet 1 or 2 in Qam Input Port and one of
the following options in Stream Delivery Type:



Multicast IP Only



Multicast IP + UDP Port