Cisco DNCS System Release 2.8.1 3.8.1 4.3.1 User Guide

1.

On the DNCS Administrative Console, click the DNCS tab.

2.

Click the Network Element Provisioning tab.

3.

Click QAM. The QAM List opens.

4.

Select the GQAM modulator on which you want to set up a multicast session. Then choose the File >

Open.

5.

Click the Advanced Parameters tab.

6.

Click Transport Stream Route: Set up. The Transport Stream Route List for [GQAM name] window

opens.

7.

Click Add. The Transport Stream Route window opens.

8.

Use the following fields when you manage TSRs.

Route ID

A unique number that identifies this TSR.

Valid values: Any 2-byte integer in the range of 1 to 65535.

Starting ECM Pid

Provides the starting PID value for the ECM PIDs for the TSR. This field,
along with the Number of ECM Pids field, defines the range of PIDs for
the TSR. 

PIDs from this range are used for inserting PowerKEY ECMs when
encrypted sessions exist 'on top of' the TSR.

Number of ECM Pids Provides the number of PIDs available for ECM PID allocation for the

TSR. This field, along with the Starting ECM Pid field, defines the range
of PIDs for the TSR.

Input

Qam Input Port

Select the input port of the source to the GQAM.



0 - 3: ASI ports 0 to 3, respectively



4: GigE port

Note: If the GQAM is a dual-GigE port GQAM, selecting port
4 selects the logical GigE port, which could physically be
either port 4 or port 5.

Stream Delivery
Type

 

Select one of the following options:



Unicast



Multicast IP Only