Cisco DNCS System Release 2.8.1 3.8.1 4.3.1 User Guide

After you add a table-based QAM to your system, you can modify any of its basic parameters whenever needed.
Follow this procedure to modify the basic parameters for table-based QAMs. 

1.

On the DNCS Administrative Console, click the DNCS tab.

2.

On the DNCS tab, click the Network Element Provisioning tab.

3.

Click Table-Based QAM.

4.

Use the Filter to display the QAM that you want to modify.

Note: For assistance using the Filter, see 

5.

Select the QAM that you want to modify. A check mark appears in the box to the left of the QAM.

6.

Click Edit. The Edit Table-Based QAM window opens for the QAM you selected.

7.

Use the following fields when you manage a table-based QAM in the DNCS.

QAM Name

The name of this table-based QAM. 

You are limited to 20 alpha numeric characters.

We recommend that you establish a naming scheme that allows you to easily
identify the QAM and where it resides.

IP Address

The GigE IP address of this table-based QAM. 

Be careful to properly place the dots (.) between numbers.

Tip: When entering IP addresses, type a period to move from octet to octet. Do

not

 press the Tab key to move from octet to octet; pressing the Tab key moves

the cursor to the next field on the window.

MAC Address

The GigE MAC address for this table-based QAM.

Online

Determines whether the QAM is active or inactive.

Headend

The headend associated with this table-based QAM.

8.

Click Save to save your changes. The Edit Table-Based QAM window closes and the changes you

made are shown in the Table-Based QAMs List window.

9.

Click Exit to close the Table-Based QAMs List window.

