Cisco DNCS System Release 2.8.1 3.8.1 4.3.1 User Guide
ASI Card Basic Parameter Settings
Use the following fields when you manage ASI cards in the DNCS.
Field
Description
Headend Name
The headend associated with the ASI card.
MPEG Source Name
The name of this MPEG source.
Example: DNCS_ASI, or, for a remote site, RNCS1_ASI or LIONN1_AS.
You can use up to 20 alphanumeric characters.
Device Type
The type of MPEG source you are adding.
Select ASI as the type of MPEG source you are adding.
If ASI does not appear in the list of device types, click in the Device Type field
and enter ASI.
and enter ASI.
IP Address
The IP address for the ASI card.
Be careful to properly place the dots (.) between numbers.
Tip: When entering IP addresses, type a period to move from octet to octet.
Do
Do
not
press the Tab key to move from octet to octet; pressing the Tab key
moves the cursor to the next field on the window.
Physical Address
The MAC address of the ASI card.
Type a dummy value (such as 12 zeros) for the MAC address of the ASI card.
Page 671