Cisco DNCS System Release 2.8.1 3.8.1 4.3.1 User Guide

Use the following fields when you manage connections for ASI cards.

Port Number

The output port on the ASI card that is physically connected to the input port
on the BFS QAM modulator. 

We recommend that you start with zero (0). 

Transport Stream ID The transport stream of the MPEG source to the BFS QAM modulator. 

Important: You will need this number when you set up the BFS QAM
modulator.

Transport Protocol

The type of output that feeds the BFS QAM modulator.

Select ASI as the type of output that feeds the BFS QAM modulator.

Note: When you set up the BFS QAM modulator that the ASI card connects to, the system will
automatically complete the Connect To fields on this window.