Cisco Cisco RF Gateway 1
Monitoring the RF Gateway 1
78-4025112-01 Rev H0
63
Resource Utilization
CPU and memory utilization are displayed for the operator in real time for
monitoring.
monitoring.
SNMP Configuration
SNMP configuration is done on the GUI using the System/SNMP & Traps page. There
are two configurations as shown in the examples below.
are two configurations as shown in the examples below.
The first configuration is for software versions prior to 2.01.09. Refer to the screen
below.
below.
In this configuration, three community strings can be set. The "Read" string is the get
community string. The "Write" string is the set community string and the "Trap"
string is the trap community string. In this configuration, all traps are SNMPv1. Up
to 5 traps can be enabled/disabled.
community string. The "Write" string is the set community string and the "Trap"
string is the trap community string. In this configuration, all traps are SNMPv1. Up
to 5 traps can be enabled/disabled.