Cisco Cisco StadiumVision Mobile Streamer Maintenance Manual

The IR remote also is a critical troubleshooting tool so it is important to ensure that all

media players can be IR-controlled even if it is not needed during normal operation.

Default Settings for the SV-4K and DMP-2K Media Player

The SV-4K and DMP-2K device ships from the factory with certain default settings.

Upon running the start-up sequence and in communication with Cisco StadiumVision

Director, the SV-4K and DMP-2K default settings are changed.

RS-232 Default Settings on the SV-4K and DMP-2K

After processing the HTML run-time module from Cisco StadiumVision Director, the

SV-4K and DMP-2K is set to the following RS-232 default settings:

NOTE: The SV-4K and DMP-2K use the same defaults as the
Cisco DMP 4310G, which matches the default settings of most
TVs.

Baud—9600 (factory default is 115200)

Parity—None

Data Bits—8

Stop Bits—1

Flow Control—None (factory default is hardware flow control only)

For information about the new RS-232 commands for the SV-4K and DMP-2K, see

Other Default Settings

By default, the following functionality is disabled on the SV-4K and DMP-2K media

player:

Secure Shell (SSH)

16 of 80