Cisco Cisco StadiumVision Director Maintenance Manual
How to Enable a DMP for Touch Screen Control
Task
2
Task
To enable a DMP for touch screen control, complete the following steps:
Action
Step 1
Log into Cisco StadiumVision Director with an administrator account.
Step 2
To configure the display controller device, do the following:
a.
Go to Control Panel > Setup > Devices > Display Specifications.
b.
Click plus (+) icon to add a device.
c.
In the Basic Info panel, specify:
–
Device name, Make, Model
–
Touch Screen Type
d.
Click Save.
Note
This configuration is sent to the DMP when you run Initialize Touch Screen for the DMP from the
Management Dashboard.
Management Dashboard.
Step 3
Go to the Management Dashboard.
Step 4
Under the DMP and TV Controls drawer, go to DMP Install > Initialize Touch Screen.