Cisco Cisco StadiumVision Director Maintenance Manual
How to Enable a DMP for Touch Screen Control
Task
3
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of
Cisco trademarks, go to this URL:
Cisco trademarks, go to this URL:
www.cisco.com/go/trademarks
. Third-party trademarks mentioned are the property of their respective owners. The
use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any
examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only.
Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.
© 2013 - 2015 Cisco Systems, Inc. All rights reserved.
examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only.
Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.
© 2013 - 2015 Cisco Systems, Inc. All rights reserved.
Step 5
In the Select Devices box, select the DMP(s) where you want to enable touch screen support.
Step 6
Click the Play icon to initialize the selected DMPs.
The display specifications from the Control Panel are sent to the DMP and the selected DMP(s) reboot.
Step 7
To calibrate the touch screens for the selected DMPs, select Show Calibration.
Step 8
Click the Play icon to calibrate the touch screen displays associated with the selected DMPs.
A calibration screen appears on the TV display.
Step 9
Follow the instructions on the TV display, and touch the crosshairs to calibrate the controller.
Action