Cisco Cisco StadiumVision Mobile Streamer Maintenance Manual
Default Settings for the SV-4K Media Player
The SV-4K device ships from the factory with certain default settings. Upon running the
start-up sequence and in communication with Cisco StadiumVision Director, the SV-4K
default settings are changed.
start-up sequence and in communication with Cisco StadiumVision Director, the SV-4K
default settings are changed.
RS-232 Default Settings on SV-4K
After processing the HTML run-time module from Cisco StadiumVision Director, the
SV-4K is set to the following RS-232 default settings:
SV-4K is set to the following RS-232 default settings:
NOTE: The SV-4K uses the same defaults as the Cisco DMP
4310G, which matches the default settings of most TVs.
4310G, which matches the default settings of most TVs.
l
Baud—9600 (factory default is 115200)
l
Parity—None
l
Data Bits—8
l
Stop Bits—1
l
Flow Control—None (factory default is hardware flow control only)
For information about the new RS-232 commands for the SV-4K, see
.
Other Default Settings
By default, the following functionality is disabled on the SV-4K media player:
l
Secure Shell (SSH)
l
Video encoding
Feature Summary for the SV-4K Media Player
This section includes the following topics:
l
l
12 of 68
© Cisco Systems, Inc. All rights reserved.