Manualsbrain.com
  1. Manuals
  2. Brands
  3. Cisco
  4. Cisco StadiumVision Mobile Streamer
  5. Release Notes

Cisco Cisco StadiumVision Mobile Streamer Release Notes

Download
Page of 46
41
   
Release Notes for Cisco Vision Dynamic Signage Director (Cisco StadiumVision Director) Release 5.0
Caveats
4.
Unplug the HDMI cable.
Workaround
 Complete the following steps:
1.
Log into Cisco Vision Dynamic Signage Director.
2.
Autoregister the DMP and assign it to HDMI/CEC standard display spec.
3.
Ensure that the HDMI cable of the DMP is attached to a HDMI CEC-compliant TV.
4.
Ensure that the HDMI cable is not unplugged.
CSCva71831—DMP stops all CEC communication when LG TV is turned off via remote.
Symptom
 DMP stops all CEC communication when LG TV is turned off via remote.
Conditions
 The following steps recreate the conditions when this defect occurs:
1.
Log into Cisco Vision Dynamic Signage Director.
2.
Autoregister the DMP and assign it to HDMI/CEC standard display specification.
3.
Ensure that the HDMI cable of the DMP is attached to an LG TV.
4.
Turn off the TV using the remote.
Workaround
 There is no workaround.
CSCva71817—Dashboard TV health should show red when CEC TV fails to respond to power 
queries.
Symptom
 Dashboard TV health is displayed green even when CEC TV fails to respond to power queries.
Conditions
 The following steps recreate the conditions when this defect occurs:
1.
Log into Cisco Vision Dynamic Signage Director.
2.
Autoregister the DMP and assign it to HDMI/CEC standard display specification.
3.
Ensure that the HDMI cable of the DMP is attached to a TV that does not respond to power query.
Workaround
 Ensure that the TV attached is compliant with HDMI CEC power query.
CSCva65713—Unable to communicate to DMP when wifi flag is set from Yes to No via POE.
Symptom
 Unable to communicate to DMP when wifi flag is set from Yes to No via POE.
Conditions
 The following steps recreate the conditions when this defect occurs:
1.
Log into Cisco Vision Dynamic Signage Director.
2.
In the DMP device setup, specify Yes for the WiFi Enabled option while the DMP is on a wired connection to the 
network.
3.
Reboot the DMP to get the wifi enabled flag.
4.
Remove the DMP power supply adapter and Ethernet cable and then reconnect the power supply only. The DMP is 
now on a wireless connection.
5.
Change the Wifi Enabled option for the DMP to No.