Cisco Cisco StadiumVision Mobile Streamer Maintenance Manual
© 2011 Cisco Systems, Inc. All rights reserved.
Page 23 of 40
Figure 14. Viewing Firmware Upgrade Status
13. After you upgrade the DMP firmware, do the following:
a. Update the Firmware Version and Build Date in the Registry.
c. Send the Global DMP Settings command to the device.
d. Stage the flash template and content (via the Control Panel). See the Staging
Content and Staging Flash Guide for details.
The above steps need to be done after a firmware upgrade since the device may
return to the factory default setting. If you do not update the registry entries, the
Dashboard will flag the DMP as non-compliant.
return to the factory default setting. If you do not update the registry entries, the
Dashboard will flag the DMP as non-compliant.
Updating the Firmware Version and Build Date in the Registry
After you upgrade to release 2.3, you need to manually update the firmware and build
date in the registry. Otherwise, the DMP will be in a non-compliant state.
date in the registry. Otherwise, the DMP will be in a non-compliant state.
1. Open the Digital Media Device Manager (DMPDM) interface for a DMP that has
the new firmware version installed.
2. Select About > Hardware and Firmware Version.
3.
Copy (exactly) the values of the „Firmware Release Version‟ and „Build Date and
Time‟, and paste them in the following registry values:
Time‟, and paste them in the following registry values:
- Globaldmpsetting.4310.info.init.build = Thu Nov 4 00:27:27 PDT 2010 [b1932]