Cisco Cisco StadiumVision Mobile Quick Setup Guide
Video Wall Cabling
A video wall can be connected in the following ways:
l
l
Daisy-Chained TV Displays for TV-Based Tile Matrix Video Walls
This cabling method is supported by all media players and uses the native tile matrix
capabilities of the TV displays in the video wall.
In this cabling method, the TV displays in the video wall group are connected together
using the DVI In/Out ports. One media player is connected to a single TV in the group
using HDMI and RS-232 connections.
shows an example of a 2x3 tile matrix configuration supported by the Cisco
DMP 4310G. This example shows one DMP controlling 4 displays in the 2x2 portion of
the video wall, and another DMP controlling 2 displays in the 2x1 portion of the video
wall.
Figure 65. Daisy-Chained 2x3 Tile Matrix Example with the Cisco DMP 4310G
IMPORTANT: The SV-4K and DMP-2K media players have
different behavior than the Cisco DMP 4310G in this example.
For the 2x1 portion of the video wall, the Cisco DMP 4310G
shrinks its canvas to fit the signal resolution. However, the SV-4K
and DMP-2K media player crops a 1920x1080 canvas to the
960x1080 signal resolution rather than shrinks it. Therefore, for
the SV-4K and DMP-2K you must specify the correct template to
match your signal resolution and your content must match the
© Cisco Systems, Inc. All rights reserved.
187 of 331