Cisco Cisco StadiumVision Mobile Streamer Quick Setup Guide

Guidelines for TV and Content Resolution with the SV-4K
and DMP-2K Media Player

The SV-4K and DMP-2K is set to run in full high-definition (HD) 1920x1080 mode by

the runtime software.

IMPORTANT: It is highly recommended that your TV supports a

minimum of 1080p HD resolution. Lower resolution displays

might need some additional configuration of the TV Display

Specification configuration in Cisco StadiumVision Director to

attempt to optimize the display. In some cases these TVs might

cut off an area of the screen, rather than resize the graphics to the

area as the Cisco DMP 4310G does.

The quality and expected resolution for video and graphics display for the SV-4K and

DMP-2K can be affected by several things:

The resolution of the TV display and its ability to negotiate to 1080p.

The configuration of the sv4k.videoMode serial command in the Display

Specifications area of the Cisco StadiumVision Director Control Panel:

When set to a resolution, this value specifies the SV-4K and DMP-2K signal

resolution.

If the resolution is set to auto-detection, then the TV negotiates the signal

resolution with the SV-4K and DMP-2K as long as the TV supports negotiation.

IMPORTANT:If you are using a 4K display, you must configure a

fixed resolution value of 3840x2160x60p in the sv4k.videoMode

serial command in the TV display specification.

The template region size.

The size of the original graphic and whether any scaling needs to happen.

NOTE: For more information about content and template

guidelines, see the

92 of 331