Cisco Cisco StadiumVision Mobile Streamer Quick Setup Guide

NOTE: You can run the Get Status command from the

Management Dashboard to get the latest TV health status known

to the DMP. This information can be up to two minutes old, or a

few seconds depending on when the power query last ran.

If the “dmp.monitorPower” parameter is set to false then you will

not get the correct TV health status.

5. Click Save.

6. Reboot the DMPs.

Configuring Portrait Mode in TV Display Specifications

User Roles

Administrator, Venue Administrator

Portrait rendering mode allows the DMPs to automatically rotate content for proper

orientation on vertically-positioned displays.

To configure the portrait mode display parameter, complete the following steps:

1. Go to:

Control Panel > Setup > Devices > Display Specifications

2. Select an existing display specification or add a new one.

3. Click Display Parameters.

4. Click the + icon to add a new display parameter.

5. Where prompted to enter a new command, type dmp.Portrait in the box.

6. In the Configured Status box, type true.

7. Click Save.

8. Reboot the DMPs.

42 of 331