Cisco Cisco StadiumVision Mobile Streamer Quick Setup Guide
Table 8. Serial Commands for External Volume Support
Serial Command
Volume Type
Description
Volume Count
Absolute
(Cisco DMP 4310G only) Specifies the
number of volume intervals to be
supported. The default is 10.
This command is configured in addition to
the corresponding Volumen commands.
Volumen
Absolute
Specifies the volume increment level,
where n is a number from 1 to the total
number of volume levels supported.
l
Configure multiple Volumen
commands for the number of
increments being supported. For the
Cisco DMP 4310G, this is up to the
number specified in the
VolumeCount command.
l
Specify whole numbers for "n." For
example specify "1"—not 01.
TIP: The best practice is to set
Volume1 to a value greater than zero. A
zero volume level is treated as a mute com-
mand, and when the user adjusts the
volume up, some displays show the status
bar as if their volume is turned up, but the
display remains muted.
VolumeUp
Relative
Specifies an incremental volume setting
determined by internal settings in the TV.
VolumeDown
Relative
Specifies an incremental volume setting
determined by internal settings in the TV.
TIP: For some TVs, the increase/decrease in volume is very
slight, requiring multiple VolumeUp or VolumeDown commands
to achieve the desired effect. For these TVs, use the
"dmp.RelativeVolumeSteps" serial command.
46 of 331
© Cisco Systems, Inc. All rights reserved.