Cisco Cisco StadiumVision Mobile Streamer Quick Setup Guide

d. Location Id—(Optional) Identifier for the location. This field is typically not

used.

e. Display Spec—Select the type of TV display at the location.

5. Click OK.

The added groups or locations are displayed in the adjoining panel view.

Linking DMPs to Locations for Ready State

User Roles

Administrator / Content Manager / Event Operator

Linking or mapping a DMP with a Location is the final step in preparing a DMP to be

able to stage content. Once a DMP is linked, it goes to "Ready" state. Then, when

content is staged it changes to "In Production" state.

This task describes how to manually link media players to locations. A faster method

when you have multiple media player/location updates is to use the Bulk

Administration Tool (BAT). For more information about BAT, see the

document.

NOTE: The "Attempt to map to location during GetStatus" option

under Auto Registration Settings in the Management Dashboard

is only supported by the Cisco DMP 4310G.

To manually link DMPs to Locations, complete the following steps:

1. Go to Control Panel > Setup > Devices.

2. Click Location-DMP Mapping.

3. In the Available Devices list, select the MAC address of the DMP that you need to

link.

4. In the Locations list, select the Location Name that you want to link to the

selected DMP.

5. Click the Link device button (between the Available Devices and Locations

65 of 331