Cisco Cisco StadiumVision Mobile Reporter Maintenance Manual
Cisco StadiumVision Director Localization Guide
How to Configure Cisco Unified IP Phone Localization
5
•
In general, client locales set within the Cisco StadiumVision Director UI are used first, followed by
any supported language detected from the web browser. The exceptions are:
any supported language detected from the web browser. The exceptions are:
–
Luxury Suites—You cannot change locales in use for Luxury Suites using the browser locale.
–
Software Manager—The Software Manager will try to detect any browser locale setting before
defaulting to the system-wide locale in Cisco StadiumVision Director.
defaulting to the system-wide locale in Cisco StadiumVision Director.
•
The CUCM user locale configuration and the Cisco StadiumVision Director locale for IP phones
must be the same.
must be the same.
•
Consider the following guidelines for the system-wide locale:
–
If you have configured your browser software to a locale that is also installed and supported by
Cisco StadiumVision Director, then your browser locale setting will override the default
system-wide server locale when you log into Cisco StadiumVision Director.
Cisco StadiumVision Director, then your browser locale setting will override the default
system-wide server locale when you log into Cisco StadiumVision Director.
–
The system-wide locale applies globally to all localized areas of the Cisco StadiumVision
Director software.
Director software.
–
The default locale is en_US.
–
The system-wide locale setting is the fallback locale when the browser or other client locale
settings cannot be detected.
settings cannot be detected.
•
The following conditions apply when you upgrade:
–
If you are using any installed language support from Release 3.1.0-797 (SP2), then when you
upgrade to Release 3.2.0-489, the default locale is reset to English (en_US). After you install
the corresponding language pack(s) for the locales that you want to use, then you will need to
reconfigure your system-wide locale.
upgrade to Release 3.2.0-489, the default locale is reset to English (en_US). After you install
the corresponding language pack(s) for the locales that you want to use, then you will need to
reconfigure your system-wide locale.
–
If you are upgrading from 3.2.0-489 to another 3.2 release, your locale settings are retained.
How to Configure Cisco Unified IP Phone Localization
Note
The CUCM user locale should be installed and applied before configuring the Cisco StadiumVision
Director luxury suite locale. Without installing the CUCM user locale, the speed dial and softkeys will
not be translated.
Director luxury suite locale. Without installing the CUCM user locale, the speed dial and softkeys will
not be translated.
To configure Cisco Unified IP Phone localization, complete the following tasks:
•
(required)
•
(required)