Cisco Cisco 1 GHz GainStar Amplifier Installation Guide
2-20
Installation and Configuration
4034994 Rev B
Removing the RF Module from the Housing, Continued
4
Remove the power cable harness from the white plastic retainer clips.
5
Unsnap the cable guide from the holes in the RF module cover.
Note: The cable can remain plugged into the power supply module.
Note: The cable can remain plugged into the power supply module.
6
Using a flat-blade screwdriver, loosen the four module retainer screws.
7
Remove the RF module from its housing and place the RF module on a secure
surface.
surface.
The following diagram shows the proper torquing sequence for the housing closure
bolts.
bolts.
CAUTION:
Avoid personal injury and damage to the RF module. Make sure that you place the
RF module on a secure surface.
RF module on a secure surface.