Cisco Prisma HDRx Reverse Optical Receiver Platform & Power Supply System Technical References
2
4035634 Rev A
Overview
Related Publication
You may find the following publication useful as you implement the procedures
in this document.
in this document.
Prisma II™ High Density Dual Reverse Receiver Installation and Operation Guide,
part number 4015908
part number 4015908
Safe Operation for Software Controlling Optical Transmission
Equipment
Equipment
If this manual discusses software, the software described is used to monitor
and/or control ours and other vendors’ electrical and optical equipment designed
to transmit video, voice, or data signals. Certain safety precautions must be
observed when operating equipment of this nature.
and/or control ours and other vendors’ electrical and optical equipment designed
to transmit video, voice, or data signals. Certain safety precautions must be
observed when operating equipment of this nature.
For equipment specific safety requirements, refer to the appropriate section of the
equipment documentation.
equipment documentation.
For safe operation of this software, refer to the following warnings.
WARNING:
Ensure that all optical connections are complete or terminated before
using this equipment to remotely control a laser device. An optical or laser
device can pose a hazard to remotely located personnel when operated
without their knowledge.
without their knowledge.
Allow only personnel trained in laser safety to operate this software.
Otherwise, injuries to personnel may occur.
Restrict access of this software to authorized personnel only.
Install this software in equipment that is located in a restricted access area.