Cisco Cisco Explorer Set-top Software Version 2.1 User Guide

Page of 272
 
Chapter 2    Network Status Diagnostic Screens for all Explorer DHCTs 
 
 
 
32 
749244 Rev G 
Field 
Name 
Description 
Possible Values 
PCR 
Lock 
The time stamp of the last PCR 
synchronization lock  
 
[Integer > 0]—number should 
change each time the screen 
refreshes; otherwise video may be 
lost 
 
n/a—tuned to an analog channel
 
A/V Disc  The sum of the discontinuity errors 
encountered on either the audio or 
video streams (A/V Disc) that have 
occurred since the current stream 
was tuned  
Note: Discontinuity errors indicate 
that packets were transmitted out of 
order or with a gap between them, 
which indicates data loss. 
 
0—no discontinuity errors 
 
[Integer > 0]—could indicate a 
problem 
 
Note: 
If A/V Disc is high, an issue 
such as macroblocking may be 
present. 
 
n/a—tuned to an analog channel
 
PTS 
A presentation time stamp (PTS) that 
changes each time the screen 
refreshes 
 
UNIX format—number should 
change each time the screen 
refreshes; otherwise video may be 
lost 
 
Important: 
If this number does not 
change each time the screen 
refreshes, then video may have 
been lost. 
 
n/a—tuned to an analog channel
 
PEI 
The number of errors (packet error 
indication [PEI]) in the MPEG stream 
before reaching the broadband 
interface processor (BIP) 
 
0—no errors in MPEG stream 
 
[Integer > 0]—errors exist and 
may cause an issue 
 
n/a—tuned to an analog channel
 
PER 
The PERs reported by the MPEG 
decoder chip 
 
0—no errors in pipeline stream 
 
[Integer > 0]—errors exist and 
may cause an issue 
 
Note:
 Some errors may be normal 
depending on the MPEG stream 
being decoded. 
 
n/a—tuned to an analog channel 
SER 
Displays the number of SERs 
reported by the MPEG decoder chip 
 
0—no server errors 
 
[Integer > 0]—errors exist and 
may cause an issue 
 
Note: Some errors may be normal 
depending on the MPEG stream 
being decoded. 
 
n/a—tuned to an analog channel