Cisco Cisco Prisma II EDR Receiver Data Sheet
Page 1 of 5
Prisma II 1310 nm High Density Transmitter and Host Module
Description
The Prisma II optical network is an advanced transmission
system designed to help optimize network architecture and
increase reliability, scalability, and cost effectiveness. The 1310
nm High Density Transmitters (HDTx) are designed for use in
the standard Prisma II chassis* and utilize standard power
supplies and fan tray. The ability to mix high-density transmitter
modules with other PII modules in the same chassis greatly
enhances the flexibility of the platform. Up to 26 transmitters
can operate in a standard 6 RU Prisma II Chassis effectively
doubling the density for 1310 nm transmitters in the chassis.
The transmitter has 1 GHz passband which greatly increases
the bandwidth for high definition TV and other advanced
services. Microprocessor control allows ease of installation and
flexibility of application. The transmitters are offered in a wide
range of output powers, from 3 dBm to 15 dBm.
system designed to help optimize network architecture and
increase reliability, scalability, and cost effectiveness. The 1310
nm High Density Transmitters (HDTx) are designed for use in
the standard Prisma II chassis* and utilize standard power
supplies and fan tray. The ability to mix high-density transmitter
modules with other PII modules in the same chassis greatly
enhances the flexibility of the platform. Up to 26 transmitters
can operate in a standard 6 RU Prisma II Chassis effectively
doubling the density for 1310 nm transmitters in the chassis.
The transmitter has 1 GHz passband which greatly increases
the bandwidth for high definition TV and other advanced
services. Microprocessor control allows ease of installation and
flexibility of application. The transmitters are offered in a wide
range of output powers, from 3 dBm to 15 dBm.
Prisma II Chassis
The Prisma II High Density Platform consists of the following modules:
Premium 1310 nm High Density Transmitters
Two HDTx in Host Module
The premium 1310 nm HDTx offers superior performance for either high power
HFC application or forward path segmentation. Transmitters are offered in 4
dBm to 15 dBm output powers and deliver both analog and digital signals.
Standard 1310 nm High Density Transmitters
The standard HDTx offers a cost-effective solution for forward path
segmentation. Transmitters are offered in 3 dBm to 12 dBm output power and
deliver both analog and digital signals.
High Density Host Module
The host module is designed to double the density of the standard PII chassis.
It provides two slots for the high density modules for each current Prisma II
slot. The simple design provides an efficient route of RF and electrical signal
between the backplane and the high density module.
HFC application or forward path segmentation. Transmitters are offered in 4
dBm to 15 dBm output powers and deliver both analog and digital signals.
Standard 1310 nm High Density Transmitters
The standard HDTx offers a cost-effective solution for forward path
segmentation. Transmitters are offered in 3 dBm to 12 dBm output power and
deliver both analog and digital signals.
High Density Host Module
The host module is designed to double the density of the standard PII chassis.
It provides two slots for the high density modules for each current Prisma II
slot. The simple design provides an efficient route of RF and electrical signal
between the backplane and the high density module.
* In a 28 connector Prisma II chassis, only the HDTx Broadcast Input port is available. The Prisma II 56 connector chassis is required to utilize
both the Broadcast and Narrowcast inputs on the HDTx.
both the Broadcast and Narrowcast inputs on the HDTx.