Cisco Cisco Prisma II EDR Receiver Data Sheet
Prisma II XD Platform
3
Power Supply
Prisma II XD Chassis Power Supply Module
• Universal AC (90-264 V AC)
• One power supply module can support 2 fully-loaded chassis
• Designed to be used in fully-redundant configuration
• Uninterruptible transfer to single supply in the event that one power supply
module fails
• Modular, rear access design and hot-swap capability allow for quick and
easy replacement in the event of failure
• Redundant connection provides power sharing from chassis-to-chassis
• Power
factor
correction
• DC power can be connected directly to the chassis without the need of a
power supply module
Specifications
AC Power Supply
Units
Notes
Input Voltage Range
V AC
100 - 240 (+/- 10%)
1
AC Frequency Range
Hz
47 - 63
Power Consumption (maximum)
W
570 W (max)
4
Output Voltage/Current
V DC/A
-48 V / 9.3 A
Line Regulation
%
±1
Load Regulation
%
±1
Environmental
Units
Notes
Temperature Range
°C
°F
0 to +50
32 to +122
2
Storage Temperature Range
°C
°F
-40 to +70
-40 to +158
Humidity Range
%
0 to 95
3
Altitude Range
ft.
-200 to +6561
(above sea level)
Physical Dimensions
Units
Notes
D x W x H
in.
cm
10.6 x 1.6 x 3.3
26.9 x 4.1 x 8.4
26.9 x 4.1 x 8.4
Weight lb
kg
2.5
1.1
1.1
Notes:
1.
1.
AC power cords must be ordered with chassis – see ordering information below to select the proper power cord.
2.
Air temperature measured at the air inlet of the Prisma II XD chassis.
3.
Recommended for use only in non-condensing environments.
4.
One power supply module can support 2 fully-loaded chassis.
Ordering Information
Description
Part Number
Power Supply Module, Prisma II XD, 90-264 V AC
1005444
Prisma II XD Chassis, DC Interconnect Cable
4023718
AC Power Cords
US
3989838
UK
3989836
Japan
3993133
Italy
3993130
Europe
3989835
China
735415
Australia
1000897
Argentina
207340