Cisco Cisco Prisma II EDR Receiver Installation Guide
Chapter 3 Operation Using CLI
50
78-4025693-01 Rev D
Value
Function
TOS
Time of Service of the ICIM
TZONE
Time zone string setting
UPDATEID
Always zero (0); this is a write-only value
Any number of these values can be listed, and the output returns the values in the
order requested.
The sample dialog below shows how this command might be sent by a network
The sample dialog below shows how this command might be sent by a network
management system.
CLI> icim info IP devtype serial swrev attnstatus size exit
IP DEVTYPE SERIAL SWREV ATTNSTATUS SIZE
172.23.200.154 5011 AADORTI 0.00.15 0 8
SUCCESS!
CLI>
Show Command
The show command is used to request information about the ICIM settings in the
info command and about the elements in the ICIM domain, how they are currently
provisioned (configured), and what traps are defined in the Traps table. The basic
command syntax is:
show argument
where argument specifies whether the request is for those items in the info
command, or for domain, provisioning, traps, or clock information, as further
explained below.
Show Domain
This command displays a list of all of the modules in the ICIM domain. The sample
This command displays a list of all of the modules in the ICIM domain. The sample
dialog below illustrates the use of this command.
ICIM> show domain <Enter>
MODID DEVTYPE SERIAL ACTIVEREV CODEREV NAME
20/03 5010 1234567 1.00.05 CF_CCB3 Power Supply 3 / Fan Tray
20/05 1031 12345678 1.65.00 CF_CCB3 1550nm EM TX FTTP
20/07 3030 AACZOIF 1.00.05 CF_CCB3 1550nm Pre-Amp FTTP
20/08 3031 !AAGJUHB 1.00.05 CF_CCB3 1550nm Post-Amp FTTP
20/05 3019 AAG1AZI 1.01.02 CF_CCB Prisma II Hybrid Amp
SUCCESS!
ICIM>
In the response, each module is identified by its chassis and slot number (MODID)
as well as by object type (DEVTYPE), serial number (SERIAL), software revision
number (ACTIVEREV), and product description (NAME).