Cisco Cisco Prisma II EDR Receiver Installation Guide

2-10 

Installation 

78-713378-01 Rev C 

Continued

To get an optical cable to the module follow these procedures. 

1. 

Insert the Fiber Fish tool through the slot located just above the bottom of the 

chassis. 

2. 

At the rear of the chassis, locate the appropriate optical cable. 

3. 

Insert the optical cable into notched area of Fiber Fish tool as shown. 

 

 

4. 

At the front of the chassis, pull the Fiber Fish tool (with cable attached) to the 

front of the chassis. 

5. 

Disengage the optical cable from the Fiber Fish tool and attach to the 

appropriate connector on desired module.  See Cable Connection Procedure.