Cisco Cisco Prisma II EDR Receiver Installation Guide
3-8
Operation Using the ICIM
78-748705-01 Rev C
ICIM Password,
Continued
Using Your Password for the First Time
Follow these steps to enter a user password in an ICIM that has never had the user
password function implemented.
1.
Access the password function as shown in Accessing the ICIM Password
Function earlier in this section.
2.
Use the
key to scroll down until Change Psw is highlighted.
3.
Press the
SEL
key.
Result: Change Psw/Shift Off is displayed.
4.
Press the
SHIFT
key to display Shift On. Then enter 8 digits as your user
password, using the 0–9 number keys.
If at any time you input a digit that is incorrect or you wish to change a digit,
use the CAN (Cancel) function by pressing the
If at any time you input a digit that is incorrect or you wish to change a digit,
use the CAN (Cancel) function by pressing the
ALRM
key to delete that digit.
5.
Press the
ENTER
key.
Result: The ICIM updates the display to show if your password entry was
accepted or rejected. If the entry was accepted, you are able to return to the
MAIN menu.
6.
If the password you entered is rejected, press the
SHIFT
key to return to the
password function, then re-enter an 8–digit password using only the 0-9
number keys. Press the
number keys. Press the
ENTER
key.
Reasons for a user password to be rejected include:
•
•
Entering more than 8 digits for the password
•
Pressing keys other than the 0–9 number keys
•
Entering an incorrect password if a valid password has been entered