Cisco Prisma MediaCenter 2 & 8 Slot Chassis Installation Guide
8
Prisma DS3/E3/STS-1 Media Converter Module Installation Instructions
4008357 Rev B
Product Description
Prisma DS3/E3/STS-1 Module
Each Prisma DS3/E3/STS-1, BNC/FX includes one pair of BNC connectors and one
pair of ST or SC fiber optic connectors and requires one slot in an SNMP-manageable
MediaCenter™ chassis or an unmanaged MediaCPE™ chassis.
pair of ST or SC fiber optic connectors and requires one slot in an SNMP-manageable
MediaCenter™ chassis or an unmanaged MediaCPE™ chassis.
Also available for single-strand fiber, the Prisma DS3/E3/STS-1, TP/SSFX module
includes pair of BNC connectors and one SC fiber optic connector. Prisma
DS3/E3/STS-1, TP/SSFX modules allow two wavelengths to share one fiber strand
— Full-Duplex data travels on different wavelengths (1310 nm and 1550 nm) —
doubling the capacity of installed fiber.
includes pair of BNC connectors and one SC fiber optic connector. Prisma
DS3/E3/STS-1, TP/SSFX modules allow two wavelengths to share one fiber strand
— Full-Duplex data travels on different wavelengths (1310 nm and 1550 nm) —
doubling the capacity of installed fiber.
Note: In order to function correctly, you must have a Prisma DS3/E3/STS-1 module
at BOTH ends of the conversion. The data transmitted on the fiber ports can only be
received and interpreted by the receive fiber of another Prisma DS3/E3/STS-1
module.
at BOTH ends of the conversion. The data transmitted on the fiber ports can only be
received and interpreted by the receive fiber of another Prisma DS3/E3/STS-1
module.
Prisma DS3/E3/STS-1 Module Illustration
Refer to the following illustration for a view of the module front panel.