Cisco Cisco Intelligent Automation for Cloud 4.3.2 Installation Guide
52
Optional Tasks
Enabling Directory Integration
5.
In the Role List field at the bottom of the optional mappings list, enter mapping attributes for role list that assigns the
user to one of the six Cisco Prime Service Catalog user groups that you created in the directory. using the convention
used for the example scenario (variables for the example appear in boldface):
user to one of the six Cisco Prime Service Catalog user groups that you created in the directory. using the convention
used for the example scenario (variables for the example appear in boldface):
expr:#memberOf#=(CN=(.*),OU=Groups,OU=Austin,OU=Texas,OU=USA,DC=notexist,DC=local)?($1):
6.
Test the mappings using the Data Test Mapping feature.
Note:
For instructions on enabling and using the Data Test Mapping feature, see “Testing Mappings” in “Directory
Integration and API,” in the Cisco Prime Service Catalog 10.1 Integration Guide. The latest version of the technical
reference guides can be found here:
reference guides can be found here:
http://www.cisco.com/c/en/us/support/cloud-systems-management/prime-service-catalog/products-technical-refer
ence-list.html
ence-list.html
Enabling Directory Integration
Before you enable directory integration, be sure you have all user groups configured for use with Cisco IAC. If you do not
have all user groups configured before you enable directory integration, you will not be able to log back in to Cisco Prime
Service Catalog.
have all user groups configured before you enable directory integration, you will not be able to log back in to Cisco Prime
Service Catalog.
1.
Choose Administration from the module drop-down list, then click Personalize Your Site.
2.
On the Customizations page, scroll down to the Common Settings area and turn the Enable Directory Integration
setting On.
setting On.
3.
Click the Update button at the bottom of the page.
Setting Global Variable to store OpenStack Keypairs
Keypairs are required when ordering an OpenStack and Amazon EC2 instances, it can be stored in shared path location
to be retrieved by Cisco Process Orchestrator on demand during instances creation in order to access instances with
private key authentication. This can be either a local path or a share path over network as long as Process Orchestrator
has proper reachability to that shared path.
to be retrieved by Cisco Process Orchestrator on demand during instances creation in order to access instances with
private key authentication. This can be either a local path or a share path over network as long as Process Orchestrator
has proper reachability to that shared path.
To configure the Global Variable from Process Orchestrator:
1.
Go to Definitions > Global Variables.
2.
Right-click on File Share Path.
3.
Select Properties.
4.
In general tab change the “value” field to preferred location.