Cisco Cisco Intelligent Automation for Cloud 4.3.2 Installation Guide
54
Using the Cisco IAC 4.3.2 Management Appliance
Deploying the Management Appliance
—
Thick Provision Eager Zeroed
—
Thin Provisioning
12.
Click Next.
13.
If the Network Mapping window appears, choose a destination network from the list. Choose a network name has
DHCP services available.
DHCP services available.
14.
Click Next.
15.
In the Ready to Complete window, review the settings.
16.
Choose the “Power on after deployment” option.
17.
Click Finish.
Deploying the Management Appliance Using the OpenStack Dashboard
Uploading the Cisco IAC Management Appliance Image File
Follow this procedure to upload the Cisco IAC Management Appliance image to an OpenStack project.
1.
Log in to the OpenStack dashboard.
2.
From the Current Project on the Project tab, select the appropriate project.
3.
On the Project tab, click Images.
4.
Click Create Image.
5.
The Create An Image dialog box appears.
6.
Enter the following values:
a.
Name. Enter a name for the image.
b.
Description. Enter a brief description of the image (optional).
c.
Image Source. Choose Image Location.
d.
Image Location. Enter the image location URL for the Cisco IAC Management Appliance.
e.
Format. Select the correct format, which for Cisco IAC 4.3.2 is VMDK (Virtual Machine Disk).
f.
Architecture. Leave empty.
g.
Minimum Disk (GB). Leave empty.
h.
Minimum RAM (MB). Leave empty.
i.
Public. Leave unchecked.
j.
Protected. Leave unchecked.
7.
Click Create Image.
Note:
The IAC VM image will upload; however, it might take some time for the status to change from Queued to Active.