Cisco Cisco Intelligent Automation for Cloud 4.3.1 Installation Guide

79

Configuring Cisco IAC With the Wizard

Setting Up Cloud Administration

Connecting Cisco Process Orchestrator

Here, you register and connect the various platform elements to be used for the cloud. This setup must be completed 
before any further setup or usage of the cloud environment can take place.

From the Wizard, on Step 2, choose Connect Cisco Process Orchestrator.

On the Connect Cloud Infrastructure form, in the Select Platform Element Type area, select Cisco Process 
Orchestrator from the Platform Element Type drop down list. The form will populate with fields relevant to Process 
Orchestrator. Enter the following:

Enter an optional Connection Name.

Verify the Host Name.

Verify the Request Center Port and the Service Link Port.

Ensure that the Connection Encrypted radio button is set to False.

The Use SSL is set to “False” by default. Setting to “True” requires SSL to be set up and enabled on Cisco 

Process Orchestrator, which is not required for Cisco IAC 4.3.1.

Enter the NSAPI username.

Enter the NSAPI Password.

Confirm the NSAPI Password.

Enter Connection Name (optional)

Enter a Description (optional)

Verify the Host Name.

Verify the Process Orchestrator Port Number.

Enter the Process Orchestrator Administrator username.

Enter the Process Orchestrator Administrator Domain (if applicable).

Ensure Process Orchestrator Connection Encrypted option is set to False.

Choose the Process Orchestrator Authentication Scheme.

Enter the Process Orchestrator Administrator Password.

Select a protocol from the Protocol drop down.

Enter a unique location string for the Process Orchestrator in the mandatory PO Location field. This is normally 
the datacenter where Cisco Process Orchestrator is located. 

Enter a Friendly Name.

Enter a User Name and User Domain.

Enter a User Password and then Confirm Password.

Ensure that the Connection Encrypted radio button is set to False.