Cisco Model D-PCG1000 PowerKEY CAS Gateway Release Notes
Chapter 2 Upgrading the QPSK Software
18
4013491 Rev C
What to Look for in the signonCount Data
Introduction
This section provides instructions on how to display the signonCount utility
interface, provides an explanation of each field of the interface, and states which
fields you should focus on first.
interface, provides an explanation of each field of the interface, and states which
fields you should focus on first.
Displaying the signonCount Interface
To display the interface of the signonCount utility, complete the following
instructions.
1 Open an xterm window on the DNCS.
2 Click and drag the edges of the xterm window to maximize the screen width.
instructions.
1 Open an xterm window on the DNCS.
2 Click and drag the edges of the xterm window to maximize the screen width.
The signonCount utility fills the width of the screen with data.
3 Type signonCount and press Enter. The signonCount utility interface opens.
4 Look at the following example of the signonCount utility interface; then, go to
4 Look at the following example of the signonCount utility interface; then, go to
Understanding the signonCount Utility Data Fields (on page 18).
signonCount Utility Example
The signonCount utility interface is similar to the following example.