Cisco Cisco IPCC Web Option Installation Guide

Network Gateway Upgrade Procedures

Gateway Technology Refresh Upgrade

How to perform a TR upgrade on an AT&T or a SS7-ITU Gateway

Note: DOS NICs are not supported by ICM/IPCC Release 7.0(0).

Step 1

Set up the new server as outlined in

Step 2

Using the ICM Service Control, stop all ICM services on the production gateway being replaced.

Step 3

Install the PCI card in the new server.

Step 4

Import the Cisco systems inc. reg key from the existing Gateway to the to the new 7.0(0) systems.

Step 5

Run ICM setup.exe from the ICM/IPCC 7.0(0) CD on the new gateway, using edit to make
necessary changes to hostnames, IPs etc.

Step 6

Check the PCI card button.

Step 7

Apply the automated hardening when prompted.

Step 8

From ICM setup, edit all instances on the server and insert the new domain name.

Step 9

From ICM setup, edit all ICM components on the server and make the necessary changes based
on the environment in which the new gateway is to run.

Step 10

Exit setup, then rerun setup from the media (do not reboot). When the main setup screen appears,
select Upgrade All.

Step 11

Reboot the server.

Upgrade Guide Cisco ICM/IPCC Enterprise & Hosted Editions Release 7.0(0)

111

Chapter 12