Cisco Cisco WAP351 Wireless-N Dual Radio Access Point with 5-Port Switch Maintenance Manual
Getting Started
Using the Access Point Setup Wizard
Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE
10
1
STEP 6
Select your time zone, and then set the system time manually or set up the WAP
device to get its time from an NTP server. For a description of these options, see
device to get its time from an NTP server. For a description of these options, see
STEP 7
Click Next. The Enable Security - Set Password window appears.
STEP 8
Enter a New Password and enter it again in the Confirm Password text box. For
more information about passwords, see
more information about passwords, see
NOTE
You can uncheck the Password Complexity box if you wish to disable
the password security rules. However, we strongly recommend keeping the
password security rules enabled.
password security rules enabled.
STEP 9
Click Next. The Enable Security - Name Your Wireless Network window appears.
STEP 10
Enter a Network Name. This name serves as the SSID for the default wireless
network.
network.
STEP 11
Click Next. The Enable Security - Secure Your Wireless Network window appears.
STEP 12
Choose a security encryption type and enter a security key. For a description of
these options, see
these options, see
STEP 13
Click Next. The Wizard displays the Enable Security- Assign the VLAN ID For Your
Wireless Network window.
Wireless Network window.
STEP 14
Enter a VLAN ID for traffic received on the wireless network.
It is suggested that you assign a different VLAN ID from the default (1) to wireless
traffic, in order to segregate it from management traffic on VLAN 1.
traffic, in order to segregate it from management traffic on VLAN 1.
STEP 15
Click Next.
For the WAP121 device, the Wizard displays the Summary - Confirm Your Settings
window. Skip to
window. Skip to
For the WAP321 device, the Wizard displays the Enable Captive Portal - Create
Your Guest Network window.
Your Guest Network window.
STEP 16
Select whether or not to set up an authentication method for guests on your
network (WAP321 only), and click Next.
network (WAP321 only), and click Next.
If you click Yes, the Wizard displays the Enable Captive Portal - Name Your Guest
Network window.
Network window.
STEP 17
Specify a Guest Network Name.