Cisco Cisco WAP351 Wireless-N Dual Radio Access Point with 5-Port Switch 维护手册

Using the Access Point Setup Wizard

Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE

10

Select your time zone, and then set the system time manually or set up the WAP 
device to get its time from an NTP server. For a description of these options, see 

Click Next. The Enable Security - Set Password window appears.

Enter a New Password and enter it again in the Confirm Password text box. For 
more information about passwords, see 

You can uncheck the Password Complexity box if you wish to disable 

the password security rules. However, we strongly recommend keeping the 
password security rules enabled.

Click Next. The Enable Security - Name Your Wireless Network window appears. 

Enter a Network Name. This name serves as the SSID for the default wireless 
network.

Click Next. The Enable Security - Secure Your Wireless Network window appears.

Choose a security encryption type and enter a security key. For a description of 
these options, see 

Click Next. The Wizard displays the Enable Security- Assign the VLAN ID For Your 
Wireless Network window.

Enter a VLAN ID for traffic received on the wireless network.

It is suggested that you assign a different VLAN ID from the default (1) to wireless 
traffic, in order to segregate it from management traffic on VLAN 1.

Click Next. 

For the WAP121 device, the Wizard displays the Summary - Confirm Your Settings 
window. Skip to 

For the WAP321 device, the Wizard displays the Enable Captive Portal - Create 
Your Guest Network window.

Select whether or not to set up an authentication method for guests on your 
network (WAP321 only), and click Next.

If you click No, skip to 

If you click Yes, the Wizard displays the Enable Captive Portal - Name Your Guest 
Network window.

Specify a Guest Network Name.