Cisco Cisco UCS B460 M4 Blade Server Data Sheet

 lists the capabilities and features of the base server. Details about how to configure the server for 

a particular feature or capability (for example, number of processors, disk drives, or amount of memory) 
are provided in 

.

NOTE:  The B200 M4 blade server requires UCS Manager (UCSM) to operate as part of 
the UCS system.

■

The B200 M4 with E5-2600 v4 CPUs requires UCSM 2.2(7b) or later

1

• Cisco UCS Manager Release 2.2(4) introduced a server pack feature that 

allows Intel E5-2600 v4 CPUs to run with Cisco UCS Manager Release 2.2(4) or 

later, provided that the CIMC, BIOS, and Capability Catalog are all running 

Release 2.2(7) or later.

• For B200 M4 upgrades to v4 CPUs, please refer to the following link:

 

■

The B200 M4 with E5-2600 v3 CPUs requires UCSM 2.2(3) or later

1. The E5-2699 v4 and E5-2699A v4 CPUs require UCSM 2.2(8e) or UCSM 3.1(2e) to operate. In 

addition, these CPUs need BIOS version B200M4.3.1.3f.0.110320162243 or later to operate.

Chassis

The UCS B200 M4 Blade Server mounts in a Cisco UCS 5100 Series blade 

server chassis or UCS Mini blade server chassis.

CPU

One or two Intel® E5-2600 v3 and v4 Series processor family CPUs. Note that 

for v4 CPU support, the firmware version must be at 2.2(7b) or above. Also 

note that the B200 M4 Blade Server BIOS inherently enables support for Intel 

Advanced Encryption Standard New Instructions (AES-NI) and does not have 

an option to disable this feature.

Chipset

Intel® C610 chipset

Memory

24 total DIMM slots

■

Support for Advanced ECC

■

Support for registered ECC DIMMs (RDIMMs)

■

Support for load-reduced DIMMs (LR DIMMs) 

■

Up to 1536 GB total memory capacity (B200 M4 configured with two 

CPUs using 64 GB DIMMs)